Point Clouds [GeoCloud]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Point Clouds ======

Point Cloud can only be shown at the 3D Window. On the map you can only see the data extent. Point Cloud data can not be shown at profiles.

The user interface for these data has a filtering option and number of entries is available, and the users can download and/or delete data, depending on assigned access levels.

{{:geocloud:adddata:a25f6eeb539457fdf1281e90be483f39.png}}

{{:geocloud:adddata:5b076fb427ee371edf25c9c28fa99bdf.png}}- open file information

{{:geocloud:adddata:31988167b20b62a3fe6d08843357325a.png}}- download data file

{{:geocloud:adddata:8f7432f34eb9fd5e550b800fb0c29c1a.png}}- delete data file

==== Point Cloud Information ====

When opening the Point Cloud Information, it will look something like below.\\
Here you can edit 'Name', 'Published Status', and 'Description'.\\
{{:geocloud:adddata:2da72c73ab7e6dcc50fd4ce2cfb1a307.png}}

==== Upload Point Cloud ====

When uploading Point Cloud, drag and drop the file to the 'Upload Window'.\\
Select the right data type. Point clouds uses the file formats .las or .laz.\\
{{:geocloud:adddata:a0440f7b2af7f35b78745ca24dfbcdee.png}}

Give the file a 'Name', 'Description' and a EPSG number. Select the 'Published Status' for the file and whether it should be added to a group(optional).

{{:geocloud:adddata:1988336b88a72bcc45aa48c569fab96d.png}}

Click 'Finish'. When the status for your file turns green and reads 'Succes' your file is uploaded to the GeoCloud Portal.

When the upload is completed, the data can be seen in the 3D window. On the map, you can see the data extent.

{{:geocloud:adddata:6ea39203c24fbe22ce9182b80436e46b.png}}
User Tools

Site Tools

Page Tools
